Plan for Progress  

Installing an above ground pool is a much more affordable choice than building a regular below ground pool. These structures come pre-made and ready to be put in directly from the warehouse. Most people may opt to consult a professional, however, there are some who would like to get their hands involved in the process. It is not very hard to accomplish, although getting the help of someone else will make the process go much more quickly.

Prior to starting, you should read the instructions and directions that come with your pool. There may be small details that will be relevant to each design and pool system therefore ignoring these may be damaging to the completed project. Once you have understood all the things that must be executed, then you may use this guide as an additional aid in the basic installation of your pool. However, if you discover that you are unable to competently follow these written instructions, then referring to a video guide may also be beneficial.

How To Install An Above Ground Pool

Required Materials

Pre-fabricated Pool
Sand
Gorilla Pad
Coving
Patio Stones
Concrete
Screws
Bolts
Required Tools
Shovel
Level
Drill

Instructions

To begin you will need to level the ground. This is the most crucial step of the process as you cannot actually level the ground once your pool is installed. Therefore you will have to make the necessary preparations. These include, shovelling the area and making it ready for your concrete. Mixing your concrete. Putting a layer of sand on your newly shovelled ground. Placing the concrete over this area and then putting in patios sized stones as levelers to support your pool frame. Basically, shovel, mix concrete, lay sand, pour over concrete, put in patios sized stones and let set. Once you do this properly you are already ¼ of the way there. Assistance at this point would be great. In addition use a level once the base has set to make certain that it is indeed level, if it is not, you will have to make minor adjustments like pouring more concrete or reducing what has already been laid.
It is a great idea for you to install a bit of gorilla pad. This will lengthen the longevity of your pool’s lining. It is created from an especially durable material which will protect your pool from naturally occuring elements such as rocks, grass and weeds. It is basically resistant to damage from pointy objects. This padding will undoubtedly be cushioning for your pool. If your pool does not come pre-made with this type of padding, then obtain your own and cut it to suit the bottom layer of your pool.
Install your track and inner walls utilizing the manufacturer’s directions. Now your drill, bolts and screws will become necessary to the process. You may put in some coving which will make attaching the liner a quicker task and will also safeguard the liner as well. The coving will decrease the likelihood that the metal in the pool will corrode. When contrasted to sand or dirt, cove will not be washed off and will not allow the metal to be compromised by extra moisture.
After you may install your vinyl liner. Let it attach completely to the pool by enabling the sun to fully penetrate it, you can accommodate this process for an entire day and wait to full your pool with water until the following day.
The last part of installation includes filling the pool with water and setting up your pump and filtration system.

Your pool can then be used once everything is put in place. However, wait a few hours after you have dropped in the chlorine as this will be very harsh on the eyes. As always make sure that small children do not swim alone, and possibly think about getting a covering to stop pesky leaves and other forms of debris from getting in your pool. Make the most of your pool and maintain it well.